Minishell Adapter

STEP 1

Make sure gun is on SAFETY. Ensure firearm is unloaded with no shells in either the magazine tube or chamber. Slide pump slide into extended position.

STEP 2

Squeeze and insert the back, flat end of the minishell adapter into the magazine loading port at an angle.

STEP 3

Push the rest of the adapter down into the magazine well so that it is flush to the rear and the bottom. Slowly rack the slide a few times to make sure that the Minishell Adapter is in the correct position. It should not move. If it does, remove the adapter and repeat steps 1-3.

STEP 4 – Removal

Make sure gun is on SAFETY. Ensure firearm is unloaded with no shells in either the magazine tube or chamber. Pull slide back so that it is retracted halfway. Insert a finger into the magazine well and hook the front end of the adapter. After the nose is angled out, the adapter can be pinched and pulled out completely.